LPSW400
DN500, 20″Machine with Long Distance Control System, Our remaining purpose is “To check out the very best, To become the Best”. Make sure you come to feel free to call with us for those who have any necessities.
Material des AußenrohrsChina Water Filling Machine, Machine3.2.1 Vakuum-Bajonettverschluss mit Klemmen
Modell
Verbindung
Typ
Nenndurchmesser des Innenrohrs
Auslegungsdruck
Material
Innenrohr
Standard
| VBemerkung | Edelstahl der Serie 300 |
| |
| DN15, 1/2″ | DN10, 3/8″ | 8 Takte | Empfohlen ≤ DN25 oder 1″. Alternativ kann die Vakuum-Bajonettverbindung mit Flanschen und Schrauben (von DN10, 3/8″ bis DN80, 3″) oder die Schweißverbindung VIP (von DN10, 3/8″ bis DN500, 20″) gewählt werden. |
| ASME B31.3 | B ist 304L, | ||
| C ist 316, | No | No | D ist 316L, |
| Nominal Diameter of Inner Pipe | HLPD | B01508 | DN15, 1/2″ |
| Design Pressure | B02008 | DN20, 3/4″ | HLPD |
| B02508 | Nenndurchmesser des Innenrohrs: | Nenndurchmesser des Innenrohrs: | Empfohlen ≤ DN25 oder 1″. Alternativ kann die Vakuum-Bajonettverbindung mit Flanschen und Schrauben (von DN10, 3/8″ bis DN80, 3″) oder die Schweißverbindung VIP (von DN10, 3/8″ bis DN500, 20″) gewählt werden. |
| Nenndurchmesser des Außenrohrs: | Empfohlen gemäß dem Unternehmensstandard für HL-Kryotechnik. Kann auch nach Kundenwunsch gefertigt werden. | ||
| Auslegungsdruck: | Empfohlener Druck: ≤ 8 bar. Alternativ kann die Vakuum-Bajonettverbindung mit Flanschen und Schrauben (≤ 16 bar) oder die Schweißverbindung (≤ 64 bar) gewählt werden. | ||
| Material | Urdu | ||
| Stromversorgungszustand: | LN2Der Standort muss die Vakuumpumpen mit Strom versorgen und HL Cryogenic Equipment die lokalen Strominformationen (Spannung und Hertz) mitteilen.23.2.2 Vakuum-Bajonettanschluss mit Flanschen und Schrauben | ||
Modell
Verbindung
Typ
Nenndurchmesser des Innenrohrs
| Auslegungsdruck | Material | |
| Innenrohr | Standard | Bemerkung |
| HLP | DF010 | 00X |
| Vakuum-Bajonettanschluss mit Flanschen und Schrauben für statisch vakuumisolierte Rohrleitungssysteme | Material des Innenrohrs. | Material des Innenrohrs. |
| Edelstahl der Serie 300 | Material des Innenrohrs. | Material des Innenrohrs. |
| Material des Innenrohrs. | Material des Innenrohrs. |
A ist 304,
B ist 304L,
C ist 316,
D ist 316L,
E steht für „anders“.
HLPD
F015
00X
DN15, 1/2″
HLPD
F020
00X
Nominal Diameter of Inner Pipe
HLPD
DN25, 1″
00X
DN25, 1″
HLPD
Design Pressure
00X
DN32, 1-1/4″
HLPD
F040
00X
DN40, 1-1/2″
HLPD
F050
00X
DN50, 2″
HLPD
F065
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +86 18090111643Empfohlener Druck: ≤ 16 bar. Alternativ kann die Schweißverbindung (≤ 64 bar) gewählt werden.X | hebräisch | DN10, 3/8″ | ungarisch
| Urdu | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +86 18090111643lettischX | DN15, 1/2″ | |||||
| +86 18090111643mazedonischX | DN20, 3/4″ | |||||
| +86 18090111643MalayalamX | DN25, 1″ |
Nominal Diameter of Inner Pipe:Marathi
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: norwegisch
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
B ist 304L,
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +86 18090111643DN20, 3/4″00X | Telugu | DN10, 3/8″ | ukrainisch | Urdu | ASME B31.3 | 00: 00X 08 is 8bar, Xhosa
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +86 18090111643Uigurisch00X | DN15, 1/2″ | |||||
| +86 18090111643F02000X | DN20, 3/4″ | |||||
| +86 18090111643F02500X | DN25, 1″ | |||||
| +86 18090111643F03200X | DN32, 1-1/4″ | |||||
| +86 18090111643F04000X | DN40, 1-1/2″ | |||||
| +86 18090111643F05000X | DN50, 2″ | |||||
| +86 18090111643F06500X | DN65, 2-1/2″ | |||||
| +86 18090111643F08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN500, 20″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: DN500, 20″
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Material des Außenrohrs
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +86 18090111643Nächste:00X | Wasserabfüllmaschine aus China | DN10, 3/8″ | 8~64 bar | Urdu | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40, 64.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +86 18090111643Kontaktieren Sie uns00X | DN15, 1/2″ | |||||
| +86 18090111643Vakuumisolierte Rohrserie00X | DN20, 3/4″ | |||||
| +86 18090111643Vakuumisolierte Phasenseparatoren der Serie00X | DN25, 1″ | |||||
| +86 18090111643W03200X | DN32, 1-1/4″ | |||||
| +86 18090111643W04000X | DN40, 1-1/2″ | |||||
| +86 18090111643W05000X | DN50, 2″ | |||||
| +86 18090111643W06500X | DN65, 2-1/2″ | |||||
| +86 18090111643W08000X | DN80, 3″ | |||||
| HFranzösisch00X | DN100, 4″ | |||||
| HSpanisch00X | DN125, 5″ | |||||
| HKoreanisch00X | DN150, 6″ | |||||
| Hgriechisch00X | DN200, 8″ | |||||
| Hdänisch00X | DN250, 10″ | |||||
| Htschechisch00X | DN300, 12″ | |||||
| HPolieren00X | DN350, 14″ | |||||
| HEsperanto00X | DN400, 16″ | |||||
| Halbanisch00X | DN450, 18″ | |||||
| HAserbaidschanisch00X | DN500, 20″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Korsisch
kroatisch
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPhawaiischX | hebräisch | DN10, 3/8″ | ungarisch | Urdu | ASME B31.3 | X:Javanisch B is 304L, C is 316, D is 316L, E is other. |
| HLPDlettischX | DN15, 1/2″ | |||||
| HLPDmazedonischX | DN20, 3/4″ | |||||
| HLPDMalayalamX | DN25, 1″ |
Nominal Diameter of Inner Pipe:Marathi
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: norwegisch
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)
Sesotho
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPTadschikisch00X | Telugu | DN10, 3/8″ | ukrainisch | Urdu | ASME B31.3 | 00: Vietnamesisch Xhosa
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLPDUigurisch00X | DN15, 1/2″ | |||||
| HLPDF02000X | DN20, 3/4″ | |||||
| HLPDF02500X | DN25, 1″ | |||||
| HLPDF03200X | DN32, 1-1/4″ | |||||
| HLPDF04000X | DN40, 1-1/2″ | |||||
| HLPDF05000X | DN50, 2″ | |||||
| HLPDF06500X | DN65, 2-1/2″ | |||||
| HLPDF08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN500, 20″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤64 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)
3.2.3 Welded Connection Type
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Piping System | DN10, 3/8″ | 8~64 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00:Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40, 64. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLPDW01500X | DN15, 1/2″ | |||||
| HLPDW02000X | DN20, 3/4″ | |||||
| HLPDW02500X | DN25, 1″ | |||||
| HLPDW03200X | DN32, 1-1/4″ | |||||
| HLPDW04000X | DN40, 1-1/2″ | |||||
| HLPDW05000X | DN50, 2″ | |||||
| HLPDW06500X | DN65, 2-1/2″ | |||||
| HLPDW08000X | DN80, 3″ | |||||
| HLPDW10000X | DN100, 4″ | |||||
| HLPDW12500X | DN125, 5″ | |||||
| HLPDW15000X | DN150, 6″ | |||||
| HLPDW20000X | DN200, 8″ | |||||
| HLPDW25000X | DN250, 10″ | |||||
| HLPDW30000X | DN300, 12″ | |||||
| HLPDW35000X | DN350, 14″ | |||||
| HLPDW40000X | DN400, 16″ | |||||
| HLPDW45000X | DN450, 18″ | |||||
| HLPDW50000X | DN500, 20″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)We insist on the principle of development of ‘High quality, Efficiency, Sincerity and Down-to-earth working approach’ to provide you with excellent service of processing for 2019 New Style China 4.8kw Electric Beer Juice Nitrogen Tin Can Filling Sealing Line Machine with Long Distance Control System, Our remaining purpose is “To check out the very best, To become the Best”. Make sure you come to feel free to call with us for those who have any necessities.
2019 New Style China Water Filling Machine, Machine, We have been proud to supply our goods to every auto fan all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
